Horse stall u-channels support wooden wallboards between the wood support posts. RAMM u-channels have pre-drilled holes and feature a rust-resistant zinc coating. Choose between galvalume (metallic) or powder-coated black finishes for a style that fits your property.
The u-channels are 1.75" x 1.75" with a 1.5" opening and available in three different lengths: 93.5", 46.5", and 7"
-
The 93.5" u-channels make a solid wooden wall wherever needed, to create approximately an 8' wall. They require forty-two (42) screws for installation. *Ships through a ground delivery service in a 96"x6"x6" box and cannot ship through USPS. Up to eight (8) 93.5" u-channels can fit per box.
-
The 46.5" u-channels are used for the bottom of stall fronts and with grilled partitions, to create approximately a 4' wall. They require twenty-four (24) screws for installation. *Ships through a ground delivery service in a 50"x6"x6" box and cannot ship through USPS. Up to eight (8) 46.5" u-channels can fit per box.
-
The 7" u-channels are used to anchor header boards on stall fronts. They require nine (9) screws for installation. *Can ship via USPS.
Installation: Screw the u-channel to your support posts. Then slide the wallboards into the u-channel and screw them to the u-channel through the pre-punched holes. Each u-channel requires stall screws for installation, but are sold separately:
*Shipping Note*
Due to the dimensions of this product, the website's shipping calculations are skewed. We recommend contacting us at 800-434-6296 for an accurate shipping rate. Additionally, it's most economical if purchased with horse stalls or in bulk.
They may also be picked up at our location: 13150 Airport Hwy., Swanton, Ohio 43558
