Essex Stall Front with Full Grill Door & Feed Door Kit, Galvalume

This Essex stall front with a full grill door and feed door allows you to easily see and feed your horse(s). The full grill doors feature 3¼" bar spacing to ensure your horse(s) safety! *For more photos and ideas, we welcome you to visit our Essex Horse Stalls Pinterest board section.

Installation: Click here to access the Essex horse stalls’ installation instructions PDF, which you can save or print for reference.

Specifications:

• Length: 10' or 12'
• Finish: Galvalume  (*all material is made with high-quality North American steel)
• Channel Gauge: 14-gauge
• Bar Gauge: 16-gauge
• Bar Diameter: ⅞"
• Bar Height (Inside-to-Inside): 33"
• Bar Spacing (On-Center): 3¼"
• Door Bottom Bar Spacing (On-Center): 2"
• Floor to Top of Header: 2x10 Header Board = 91⅝", 2x12 Header Board = 93⅝"
• Floor to Bottom of Bars: 48½"
• Door Height (Finished): 86¾"
• Door Width: 51¼"
• Door Opening Width (Standard): 48"
• Door Track: 8' Premium Track
• Door Latch: Door Top Latch System
• Door Latch Lifting Rod Length: 43¼"
• Door Guide: Stay Roller
• Door Stopper: Post Bumper
• Wood Direction: Horizontal
• Warranty: 1-Year Warranty on Material Defects

10' Kit Includes:

• 1, Essex Full Grill Door Kit
• 1, Premium Track Door Hardware Kit with Long Lifting Rod
• 1, 65" Essex Grillwork Section Kit
• 1, Essex Feed Door Kit
• 2, 46.5" U-Channels
• 4, 7" U-Channels
• 109, #12 x 1-1/4" Phillips Pan Head Stall Screws
• 1, Sliding Door Pin Lock Latch Kit

12' Kit Includes:

• 1, Essex Full Grill Door Kit
• 1, Premium Track Door Hardware Kit with Long Lifting Rod
• 1, 91" Essex Grillwork Section Kit
• 1, Essex Feed Door Kit
• 2, 46.5" U-Channels
• 4, 7" U-Channels
• 118, #12 x 1-1/4" Phillips Pan Head Stall Screws
• 1, Sliding Door Pin Lock Latch Kit

*Not Included: Lumber is not included; we recommend tongue and groove wood for all RAMM horse stall systems. The wood board count in the installation instructions is estimated, based on [installed] 5” face/spaced boards. Essex stalls must be installed with wood or metal support