RammFence / Pro-Tek Electric Rope Accessories

Pro-Tek Electric Rope Accessories

Now that you have your Pro-Tek electric rope horse fencing selected, you will need to install your fence properly with compatible accessories. Following the manufacturer's installation instructions and using the proper accessories, where recommended, will ensure your fence is installed for long-lasting use.

Installation Tips

  • Tensioning: You can tension the Pro-Tek electric rope horse fencing system with wire tighteners or with the ElectroBraid™ tension kit (yes, it's compatible).
  • Splicing: Running two ends of Pro-Tek electric rope through the electric rope splice will connect the two rail ends together.
  • Connection: To run the electric current to your Pro-Tek rope, you will need to run your burial wire and Pro-Tek electric rope rail through an electric rope splice.*Note: Pro-Tek electric rope is a stainless steel-based fence system and is not compatible with copper-based products. If you need to connect a copper wire or ElectroBraid™ to a Pro-Tek rail, you will need to use a neutral plate connector.

 

Tensioners: 

  • (WT*) Wire Tightener – The wire tightener is a strong tensioner that can be used with your Pro-Tek Braid & Rope. Simply install your stainless steel electric braid or rope and tighten with a ½" drive ratchet. Not to be used with coated wire or copper fence products. Compatibility: Pro-Tek Braid & Pro-Tek Rope

  • (ES) Electric Rope Splice (3-Pack) – This electric rope splice is a versatile connector, strong enough to be used as a splicer or at terminations. To install, all you need to do is insert your electric fence rail into the rope splice and tighten down the two bolts. Sold in packs of 3. Compatibility: Pro-Tek Braid & Pro-Tek Rope

  • (EBTKIT) ElectroBraid™ Tension Kit – Add tension to your electric rope horse fencing with the ElectroBraid™ tension kit. Everything needed to add tension to your ElectroBraid™ or Pro-Tek electric rope fencing is included! ElectroBraid™, Pro-Tek Braid, &  Pro-Tek Rope

 

Connectors: 

  • (ES) Electric Rope Splice (3-Pack) – This electric rope splice is a versatile connector, strong enough to be used as a splicer or at terminations. To install, all you need to do is insert your electric fence rail into the rope splice and tighten down the two bolts. Sold in packs of 3. Compatibility: Pro-Tek Braid & Pro-Tek Rope

  • (UBC) U-Bolt Connector – The u-bolt connector transfers the electricity from the burial wire to your electric braid or rope horse fencing system. It is tightened with a socket and drive ratchet. This u-bolt connector is constructed of galvanized steel for durability. Compatibility: Pro-Tek Braid & Pro-Tek Rope

  • (EBNPC) Neutral Plate Connector – This neutral plate connector allows you to take power to or from an existing non-copper fencing system and connect it to copper-based ElectroBraid™. The neutral plate connector also prevents the wire from shorting due to corrosion. Compatibility: ElectroBraid™, Pro-Tek Braid, &  Pro-Tek Rope

 

Insulators: 

  • (EBR*) Roller Insulators (10-Pack) – These unique roller insulators allow your electric fence rails to roll through the insulators on the outside and inside corners of your horse fence system. They're specifically used for corner and end posts. 2.5" heavy-duty roller insulator screws are used for attaching roller insulators or electric claw insulators to fence posts but are sold separately. Black webbing can also be used to secure your roller insulators to the post. Posts Compatibility: Wood

  • (CLI*) Inside Corner Lag Insulator – Made of heavy-duty material for a long-lasting professional installed look. For up to 90º on an inside corner. Screws directly into wooden corner posts while holding the wire away from the post. Posts Compatibility: Wood

  • (IRI*HD) Heavy-Duty Ring Insulator – The durable extra heavy-duty ring insulator quickly screws into wood posts and tightly hold electric fencing. The fencing is held 2" away from the post and is easy to install. These are ideal for handling more tension. Posts Compatibility: Wood

  • (IR*) Ring Insulator – This durable ring insulator quickly screws into wood posts and will hold your electric fencing tightly. It will hold the fencing 2" away from the fence posts and are very easy to install (even easier with our ring insulator adaptor). Posts Compatibility: Wood

  • (6ERI*) 6" Ring Insulator – This 6" ring insulator is made of a continuous steel reinforced ring with a heavy screw at the end. This ring insulator will extend your fence rail 6" from wooden fence posts, firmly fastening the fencing to the posts without losing energy. Posts Compatibility: Wood 

  • (IWR6) 6" Extended Angle Ring Insulator (10-Pack) – These 6" extended angle ring insulators extend the electric fence 6" out from the wooden posts. They firmly fasten the electrified fence to the wood posts without losing energy. Posts Compatibility: Wood 

  • (IRIC) Ring Insulator Clamp – These durable ring insulators tightly hold the electric wire fencing away from the fence and are installed by clamping onto either pipe or round rod posts. They are easy to install and remove but is unlikely to come off at other times. Posts Compatibility: Pipe or Round Rod

  • (CWPIP*) Corner Pin-Lock Wood Insulators (10-Pack) – These (BRAND NEW!) highly-flexible corner pin-lock wood insulators lock your fence rail in place with the provided pins for your wood posts. They're available in black or white. Posts Compatibility: Wood 

  • (ICC*) Electric Claw Insulators (25-Pack) – Fasten your electric fence without losing energy through the post with these heavy-duty electric claw insulators. The fence can be installed by turning it about 80° and sliding it into the insulator's slot. Posts Compatibility: Vinyl & Wood

  • (EBOI) 5" Offset Insulators (15-Pack) – You can add these 5" offset insulators to your existing electric fencing system to act as a barrier between your horses and your fence. This will also put a stop to your horses who may like to crib on wooden fencing. Posts Compatibility: Wood 

  • (I81) Wood Pin-Lock Insulators (25-Pack) – These wood pin-lock insulators tightly fasten electrified fencing to your wood fence posts without losing energy. A molded pin holds the wire tightly and when you are ready to release the wire, simply pull the pin. Posts Compatibility: Wood  

  • (ITE*) Universal Pin-Lock Insulators (25-Pack) – These universal pin-lock insulators tightly fasten electrified fencing to posts without losing energy. A molded pin holds the fence tightly, then to release the wire, simply pull the pin. Posts Compatibility: T-Posts, Vinyl, & Wood

  • (EXTPIP*) Extended Pin-Lock T-Post Insulators (12-Pack) – Extended pin-lock t-post insulators keep your horses at a safer distance from the t-posts. Slides them onto your t-posts and lock in your fence rail with the provided pins.

  • (TPIP*) Pin-Lock T-Post Insulators (25-Pack) – Pin-lock t-post insulators slide onto your t-posts and lock in your fence rail with the provided pins. Available in black and white. Posts Compatibility: T-Posts

  • (TPIC*) T-Post Line Insulators (25-Pack) – The t-post line insulators fit securely on standard (1.25" or 1.33") studded t-posts. Created as one molded piece, these insulators require no tools or hardware; allowing for an easy installation. Posts Compatibility: T-Posts

  • (R4TR*) T-Post Toppers (10-Pack) – Built with high-density polyethylene and UV stabilizers, the t-post toppers were made to handle the roughest weather conditions and grip tight to the t-posts to stop the fencing from whipping around. Posts Compatibility: T-Posts

  • (IS1B) T-Post Claw Insulators (25-Pack) – The t-post line insulators fit securely to your t-posts and work great with any electric rope or braided electric horse fencing. These insulators require no tools or hardware; allowing for easy installation! *CLOSEOUT ITEM*

 

Gate Supplies: 

  • (ERG) Electric Bungee Gate Kit – This electric bungee gate kit is compatible with any horse fencing, gate openings up to 20' in length, and can be used with either wood or t-posts. It is safe for horses and all livestock and is designed to never touch the ground when the gate is open.

  • (EBGATE) ElectroBraid™ Gate Kit – The ElectroBraid™ spring handle gate kit is a complete set of components for a safe 15'-20' electric horse gate. Gate handles gates make the perfect, cost-effective gates; providing instant easy access, in or out of paddocks.
 

Do you have questions about what Pro-Tek Braided Electric horse fence supplies you need for your project? We welcome you to call us at 1-800-434-6296 to speak with a friendly RAMM account manager. You may also visit our Horse Fence FAQs page for the most common questions we have regarding horse fence installations.

Pro-Tek electric rope is backed by a 12-year warranty. *Only available at RAMM. For more photos and ideas, we welcome you to visit our Pro-Tek Rope Pinterest board section.