Cambridge Stall Door Track Hardware
-
Cambridge Premium Track & Door Hardware Kit
Everything you need to mount your Cambridge horse stall door is included in this Cambridge Premium track door hardware kit, including the 8' Premium track itself, end caps, mounting brackets, trolleys, and more!
Compatibility: Cambridge Stalls
Product Details -
Cambridge Premium Track Door Hardware Kit
The Cambridge Premium track door hardware kit includes the components needed to hang a Cambridge horse stall door, excluding the door itself and the 8' Premium track.
Compatibility: Cambridge Stalls
Product Details -
8' Premium Track
RAMM's 8' Premium track is a teardrop-shaped, heavy-duty self-cleaning track system. This unique profile can be squarely mounted, while the rounded bottom allows for self-cleaning and self-aligning.
Product Details -
Premium Track Front Mount Bracket, Galvalume
The Premium track front mount bracket is a key component to installing your RAMM 8' Premium track. Seven brackets are needed for a proper installation.
Compatibility: Cambridge and Derby Stalls or Barn Doors
Product Details -
#10 x 1-1/2" Phillips Pan Head Premium Track Bracket Screw, Zinc-Plated
Sold individually, these #10 - 1.5" long, zinc-plated Premium track bracket screws are used to install track brackets, which are used to hang the 8' Premium track to your horse stall.
Product Details -
#14 x 1" Phillips Pan Head Tek Self-Drilling Clip Screw, Zinc-Plated
The number 14 - 1- zinc-plated clip screws attach your Premium track latch catch bracket and the 90- Premium track trolleys large flange to your stall door's channel.
Product Details -
Premium Track Latch Catch Bracket, Stainless Steel
The Premium track latch catch bracket works with the spring bar latch for the Premium track system. Compatible with the Cambridge, Dublin, and Nobleman horse stalls.
Product Details -
Cambridge Door Latch Filler Bar
The Cambridge door latch filler bar is installed over the guide post, opposite the door latch bar. Be sure the filler bar is seated completely down - use a block of wood and hammer/rubber mallet if necessary to tap the filler bar down.
Compatibility: Cambridge Stalls
Product Details -
Cambridge Door Latch Bar
The Cambridge door latch bar is installed opposite the door latch filler bar. Simply, insert the latch bar through the top of the stall door with the spring between the channel and cotter pin.
Compatibility: Cambridge Stalls
Product Details -
Neoprene O-Ring for Filler Bar
The neoprene o-ring is used with our door latch filler bar – two required for installation. The o-rings slide over the guide post and should be approximately 1" from the bottom and 1/2" from the top.
Compatibility: Cambridge Stalls
Product Details -
Door Latch Bar Spring
The door latch bar spring is used in our "One Touch" Premium track system. For installation, insert the door latch bar through the top of the door with the door latch bar spring between the channel and cotter pin.
Product Details -
Panel Latch Bar 1/8" X 1-1/2" Cotter Pin (Zinc-Plated)
The latch bar cotter pin is used in the "One Touch" Premium track system. For installation, insert the door latch bar through the top of the door with the latch bar spring between the channel and cotter pin.
Product Details -
#8 x 1" Phillips Pan Head Tek Self-Drilling Clip Screw, Zinc-Plated
This #8 x 1" Phillips pan head tek self-drilling clip screw has a zinc-plated finish for rust protection. Sold individually, these screws are used in different RAMM horse stall installations.
Product Details -
Premium Track 1/2" x 6-1/2" Offset Trolley Bolt & Nuts, Zinc-Plated
Twist your 0.5" x 6.5" offset trolley bolt as much as necessary, plumb to the door. Then adjust the jam and flange nuts up or down accordingly, to level the door for smooth sliding door operation.
Compatibility: Premium Track Trolley
Product Details -
Premium Track Trolley, Zinc-Plated
The Premium track trolley is used for hand-sliding stall doors in the 8' Premium track. With no metal-to-metal contact, it functions very quietly. Sold individually, two trolleys and bolts are needed per door.
Compatibility: Premium Track Offset Trolley Bolt
Product Details -
3/8" x 3-1/2" Hex Head Bolt, Zinc-Plated
This 3/8" x 3-1/2" hex head bolt will keep your Premium track trolleys from sliding off of the end of your 8' Premium track. This bolt acts as a door stopper.
Compatibility: 3/8" USS Flat Washer & 3/8" Lock Nut
Product Details -
3/8" USS Flat Washer, Hot-Dip Galvanized
This 3/8" USS flat washer slides onto the 3/8" x 3-1/2" hex head bolt and is fastened with the 3/8" lock nut. Combined, they act as the sliding stall door's stopper.
Compatibility: 3/8" x 3-1/2" Hex Head Bolt & 3/8" Locknut Product Details
-
3/8" Lock Nut, Zinc-Plated
This 3/8" lock nut secures the 3/8" USS flat washer and 3/8" x 3-1/2" hex head bolt to the 8' Premium track. Combined, they act as the sliding stall door's stopper.
Compatibility: 3/8" USS Flat Washer & 3/8" x 3-1/2" Hex Head Bolt
Product Details -
Premium Track End Cap
Premium track end caps help keep the sliding stall door's track as clean as possible. They prevent animals and debris from entering the track. Keep that sliding door's glide as smooth as the first day!
Track: 8' Premium Track
Product Details -
Stay Roller
The stay roller is designed to guide a horse stall door smoothly along the track. It keeps doors up to 1½" thick aligned with the track and prevents them from being kicked out.
Door Compatibility: Accommodates doors up to 1½" thick.
Product Details -
1/4" x 1-1/2" Phillips Pan Head Stay Roller Screw, Zinc-Plated
Three 1/4" x 1-1/2" Phillips pan head stay roller screws are needed to install your stay roller. Sold individually, choose between zinc-plated or powder-coated black finishes.
Compatibility: Stay Roller
Product Details -
Post Bumper
The post bumper is made of heavy-duty solid steel and is compatible with doors that are up to 1½" thick. It keeps the door tight to the stall front and won't allow it to swing outward while closed.
Door Compatibility: Accommodates doors up to 1½" thick.
Product Details -
5/16" x 1-1/2" Hex Head Lag Screw, Zinc-Plated
The 5/16" x 1-1/2" hex head lag screw is used to secure stall components such as the post bumper, door latch handle, and more. Two lag screws are required for both installations. Sold individually.
Product Details
There are a lot of pieces that go into assembling a sliding door track system for each horse stall door. This page is dedicated to any replacement part you may want or need for the Cambridge horse stall series. We offer a Cambridge Premium track stall door kit that includes everything you need for a Cambridge sliding stall door (including the 8' track itself) or you can select replacement parts a la carté.
*For more photos and ideas, we welcome you to visit our Cambridge Horse Stalls Pinterest board section.