Premium Track Hardware
-
Premium Track Front Mount Bracket, Galvalume
The Premium track front mount bracket is a key component to installing your RAMM 8' Premium track. Seven brackets are needed for a proper installation.
Compatibility: Cambridge and Derby Stalls or Barn Doors
Product Details -
Premium Track 1" Extended Top Mount Bracket, Galvalume
The Premium track top mount bracket is a key component to installing your RAMM 8' Premium track. Seven brackets are needed for a proper installation.
Compatibility: Essex and Oxford Stalls
Product Details -
Premium Track Flush Top Mount Bracket, Galvalume
The Premium track flush top mount bracket is a key component to installing your RAMM 8' Premium track. Seven brackets are needed for a proper installation.
Compatibility: Dublin Stalls
Product Details -
Premium Track Latch Catch Bracket, Stainless Steel
The Premium track latch catch bracket works with the spring bar latch for the Premium track system. Compatible with the Cambridge, Dublin, and Nobleman horse stalls.
Product Details -
#10 x 1-1/2" Phillips Pan Head Premium Track Bracket Screw, Zinc-Plated
Sold individually, these #10 - 1.5" long, zinc-plated Premium track bracket screws are used to install track brackets, which are used to hang the 8' Premium track to your horse stall.
Product Details -
#12 x 1-1/4" Phillips Pan Head Stall Screws, 50-Pack, Zinc-Plated
The #12 1.25" stall screws are used for attaching stall components and install easily with the Phillips drive pan head design. Sold in packs of 50 with a zinc-plated finish.
Product Details -
8' Premium Track
RAMM's 8' Premium track is a teardrop-shaped, heavy-duty self-cleaning track system. This unique profile can be squarely mounted, while the rounded bottom allows for self-cleaning and self-aligning.
Product Details -
1/4" x 4" Hex Head Lag Screw, Zinc-Plated
After aligning your track's holes with the door posts, fasten two 1/4" x 4" hex head lag screws along with two 1/4" flat washers through the holes along the top edge of the track at the door post locations.
Track: 8' Premium Track
Product Details -
1/4" Flat Washer, Zinc-Plated
After aligning your track's holes with the door posts, fasten two 1/4" x 4" hex head lag screws along with two 1/4" flat washers through the holes along the top edge of the track at the door post locations.
Track: 8' Premium Track
Product Details -
Premium Track Splice Clip, Galvalume
This Premium track splice clip connects two 8' Premium tracks together to form one, 16' Premium track system. This is a great piece for assembling long sliding barn doors and is made to last!
Track: 8' Premium Track
Product Details -
90° Premium Track Trolley & Door Hanging Kit, 2-Pack, Galvanized
The 90° Premium track trolley kit includes a pair of trolleys and all of the installation hardware. They accommodate solid sliding doors that are 1½" to 2½" thick, weighing up to 600 lbs.
Compatibility: Derby Stalls and Barn Doors (1¾" to 2½" thick)
Product Details -
#14 x 1" Phillips Pan Head Tek Self-Drilling Clip Screw, Zinc-Plated
The number 14 - 1- zinc-plated clip screws attach your Premium track latch catch bracket and the 90- Premium track trolleys large flange to your stall door's channel.
Product Details -
Premium Track Trolley, Zinc-Plated
The Premium track trolley is used for hand-sliding stall doors in the 8' Premium track. With no metal-to-metal contact, it functions very quietly. Sold individually, two trolleys and bolts are needed per door.
Compatibility: Premium Track Offset Trolley Bolt
Product Details -
Premium Track 1/2" x 9" Offset Trolley Bolt & Nuts, Zinc-Plated
Premium offset trolley bolts connect Premium track trolleys to your sliding stall door track system. The trolley goes through the top of the door and suspends it, allowing it to slide smoothly.
Compatibility: Premium Track Trolley
Product Details -
Premium Track End Cap
Premium track end caps help keep the sliding stall door's track as clean as possible. They prevent animals and debris from entering the track. Keep that sliding door's glide as smooth as the first day!
Track: 8' Premium Track
Product Details -
3/8" x 3-1/2" Hex Head Bolt, Zinc-Plated
This 3/8" x 3-1/2" hex head bolt will keep your Premium track trolleys from sliding off of the end of your 8' Premium track. This bolt acts as a door stopper.
Compatibility: 3/8" USS Flat Washer & 3/8" Lock Nut
Product Details -
3/8" USS Flat Washer, Hot-Dip Galvanized
This 3/8" USS flat washer slides onto the 3/8" x 3-1/2" hex head bolt and is fastened with the 3/8" lock nut. Combined, they act as the sliding stall door's stopper.
Compatibility: 3/8" x 3-1/2" Hex Head Bolt & 3/8" Locknut Product Details
-
3/8" Lock Nut, Zinc-Plated
This 3/8" lock nut secures the 3/8" USS flat washer and 3/8" x 3-1/2" hex head bolt to the 8' Premium track. Combined, they act as the sliding stall door's stopper.
Compatibility: 3/8" USS Flat Washer & 3/8" x 3-1/2" Hex Head Bolt
Product Details -
Post Bumper
The post bumper is made of heavy-duty solid steel and is compatible with doors that are up to 1½" thick. It keeps the door tight to the stall front and won't allow it to swing outward while closed.
Door Compatibility: Accommodates doors up to 1½" thick.
Product Details -
5/16" x 1-1/2" Hex Head Lag Screw, Zinc-Plated
The 5/16" x 1-1/2" hex head lag screw is used to secure stall components such as the post bumper, door latch handle, and more. Two lag screws are required for both installations. Sold individually.
Product Details -
1/4" x 1-1/2" Phillips Pan Head Stay Roller Screw, Zinc-Plated
Three 1/4" x 1-1/2" Phillips pan head stay roller screws are needed to install your stay roller. Sold individually, choose between zinc-plated or powder-coated black finishes.
Compatibility: Stay Roller
Product Details -
Stay Roller
The stay roller is designed to guide a horse stall door smoothly along the track. It keeps doors up to 1½" thick aligned with the track and prevents them from being kicked out.
Door Compatibility: Accommodates doors up to 1½" thick.
Product Details -
Adjustable Stay Roller Kit, Zinc-Plated
The adjustable stay roller kit is used to guide horse stall and/or barn doors (1" to 3¾" thick) smoothly along the track. The guide wheel will keep your door on track; preventing it from swinging outward.
Door Compatibility: Accommodates doors 1" to 3¾" thick.
Product Details -
Adjustable Stay Roller, Zinc-Plated
The adjustable stay roller is made from galvanized steel and comes with a 2" non-marking plastic guide wheel. The guide wheel will keep your door from swinging outward, keeping it in line.
Door Compatibility: Accommodates doors 1" to 3¾" thick.
Product Details -
Premium Track 1/2" x 6-1/2" Offset Trolley Bolt & Nuts, Zinc-Plated
Twist your 0.5" x 6.5" offset trolley bolt as much as necessary, plumb to the door. Then adjust the jam and flange nuts up or down accordingly, to level the door for smooth sliding door operation.
Compatibility: Premium Track Trolley
Product Details
Choose from an assortment of our replacement Premium track hardware supplies! RAMM's recently developed 8' Premium track is a teardrop-shaped, heavy-duty self-cleaning track system. Its unique profile has a square side allowing the track to be firmly and squarely mounted. There is an additional lip at the bottom of the track to add even more strength and stability. With a weight rating of 600 lbs., this track system accommodates the weight of full-metal door styles.
Depending on how you're mounting your sliding door, determines the mounting brackets you'll need:
-
Side Mount Track Brackets = Cambridge & Derby Horse Stalls (as well as barn doors)
-
Flush Top Mount Track Brackets = Dublin Horse Stalls
If you have any questions about the Premium track system, we welcome you to call 800-826-0938 to speak with one of our friendly expert account managers.